KM Photopolymer Printmaking Plates
| Tyobo KM Photopolymer Printmaking Plates
|
KM steel backed photopolymer plates offer exceptional detail and clarity while capturing light and midtone grays. Km plates are used in photo intaglio and relief flexographic printing. Each plate comes layered with a U.V. ultraviolet protective sheet that peels off prior to use.
Exposing Tyobo KM Photopolymer Plates
KM Photopolymer emulsion is a steel backed photopolymer plate. It can be cut to size using the Kutrimmer 1043 plate cutter. After peeling back the UV protective sheet the KM photopolymer plates are commonly exposed for photo intaglio and relief printing using a multi spectrum metal halide exposure unit.Developing Tyobo KM Photopolymer Plates
Km Photopolymer plates are developed in luke warm tap water. This procedure provides a safe alternative to traditional relief printing.Tyobo KM Photopolymer Plate Emulsion Thickness
KM photopolymer Emulsion comes in ___ thicknesses.The emulsion on KM 43 Photopolymer plate is ???.017"??? thick
KM 73 photopolymer emulsion is ___"??? thick.
Tyobo Photopolymer Printmaking Plate Pricing
Item # |
KM 43 Plate Size |
1-9 plates |
10-19 plates |
20+ plates |
| 35020811 | 8 1/2" x 11 1/2" ?mm x ?mm |
$10.00 | $9.25 | $8.25 |
| 35021116 | 11 1/2" x 16 1/2" ?mm x ?mm |
$20.00 | $18.50 | $16.50 |
| 35021623 | 16 1/2" x 23 3/8" ?mm x ?mm |
$40.00 | $37.00 | $33.00 |
How to Use Photopolymer Printmaking Plate
 Printmaking With Photopolymer Plates
|
By: Dianne Longley
A complete guide to the uses of photopolymer plates with step by step instructions.
The book includes an overview of various print media, a history of photopolymer plates and a schematic for building an exposure unit.
Paperback 112 pages.
$34.90
